Our multi-stage vacuum generators produce a maximum vacuum of 90%, equal to a final vacuum level of 100 mbar abs., with different suction capacities. They operate by use of compressed air from 1 to 6 bar.

Working principle

Each ejector is based on the Venturi principle: the supply fluid (compressed air) is led high speed by a convergent pipe into the fluid to be extracted (volume of the air to be sucked). This mixture is then led into two or three divergent pipes, where its kinetic energy is transformed into pressure energy for it to enter in the environment at a higher pressure (atmospheric pressure at the exhaust).

Technical features

The main asset of multi-stage vacuum generators is its ability to exploit the kinetic energy of the supply compressed air via several specially dimensioned in-line ejectors, before releasing it in the atmosphere. This system allows, given the same capacity, a reduced compressed air consumption compared to the single-stage vacuum generators.

The suction flow rate is indirectly proportional to the differential between the pressure of the fluid to be sucked and the external (atmospheric) pressure.

The reduced size and weight make multi-stage vacuum generators compact in relation to their great suction capacity.

The absence of moving parts make them particularly silent and allow them to be used continuously, without developing heat. Being supplied exclusively by compressed air, these vacuum generators are explosion-proof and can be used in work environments with temperatures ranging from -20 to +80 °C.

They are fully made with stainless materials.

Thanks to all these features, a good filtration of the supply and sucked compressed air is sufficient to make these generators are fully maintenance-free.

Multi-Stage Vacuum Generators – Compact and High-Performance

These new-generation vacuum generators feature advanced ejectors assembled onto small modules, delivering exceptional suction flow rates in a compact design.

Key Features:

1. Exceptional Suction Performance:
   • Operates with a compressed air supply of 4 - 5 bar.
   • Produces a maximum vacuum of 85%.
   • Suction flow rate ranges between 3.6 and 18 m³/h, depending on the number of modules.
2. Built-in Silencer:
   • Equipped with an integrated silencer for quieter operation, ensuring minimal noise levels.
3. Compact and Durable Design:
   • Constructed from slightly anodised alloys for durability and lightweight performance.
   • Can be installed in any position, allowing greater flexibility for various applications.
4. Applications:
   • Ideal for interconnecting vacuum cup gripping systems.
   • Especially suited for the industrial robotics sector, requiring high-performance equipment with reduced weight and size.

Product Codes:
M3, M7

Product codes: M10 M14 M18

Ultra-Silent Multi-Stage Vacuum Generators – M3SSX and M7SSX

These vacuum generators, part of the M series, feature the same advanced technical specifications as the others in the range, with the added advantage of exceptional noise reduction.

Key Features:

1. Enhanced Noise Reduction:
   • Equipped with both a built-in silencer and an external SSX silencer, providing superior noise suppression.
   • Ideal for environments requiring extremely low noise levels.
2. Reliable Performance:
   • Maintains the high suction flow rate and compact design that defines the M series vacuum generators.
   • Designed to operate seamlessly with applications requiring precision and efficiency.
3. Applications:
   • Perfect for work environments where noise minimization is critical.
   • Recommended for systems that demand quiet, high-performance vacuum generation.

Product Codes:
M3SSX, M7SSX

Product codes: M10SSX M14SSX M18SSX

Fixing Supports for Multi-Stage Vacuum Generators

These fixing supports are designed to securely mount multi-stage vacuum generators onto machinery, providing reliability and convenience for a variety of industrial applications.

Key Features:

1. Material Options:
   • Standard construction in anodised aluminium.
   • Optional stainless steel versions are available upon request for enhanced durability and resistance.
2. Mounting Mechanism:
   • Fixes vacuum generators to the machine via a cylindrical slotted pin or a ball pin housed within the machinery, ensuring stability and ease of use.
3. Application Versatility:
   • Ideal for robotic gripping systems.
   • Simplifies the installation of vacuum generators on profiles widely used in the automotive sector.

Product Codes:
00FCH23, 00FCH22, 00FCH13, 00FCH12

These generators are true independent vacuum units that can control an entire vacuum gripping system. Their distinctive features are their compact size and great suction flow rate.

They are composed of a mono-block anodised aluminium structure onto which are assembled:

- A modular and silenced multi-stage vacuum generator.

- A micro solenoid valve for supplying compressed air to the generator.

- A micro solenoid valve for blowing the exhaust compressed air.

- An adjustable flow regulator for dosing the exhaust air.

- A unidirectional check valve, located on the suction inlet, for maintaining the vacuum in case of electricity failure.

- A digital vacuum switch provided with display and commutation LEDs, for managing the compressed air supply and for signalling the safety cycle start-up.

- An anodised aluminium manifold provided with vacuum connections and a built-in filter easy to inspect.

By activating the compressed air power micro solenoid valve, the generator creates vacuum for use. As soon as the preset maximum value is reached, the digital vacuum switch acts on the electric coil of the micro solenoid valve and stops the air supply, reactivating it when the vacuum falls below the minimum level.

Besides maintaining the level of vacuum within set safety values (hysteresis), this modulation allows for considerable compressed air savings.

A second signal from the vacuum switch (also adjustable and independent with respect to the first) can be used to start the cycle when the level of vacuum reached is suitable for use. Once the work cycle is completed, the micro solenoid valve that supplies air to the generator is deactivated while, at the same time, the ejection solenoid valve is activated for quick restoration of the atmospheric pressure upon use.

The multi-function MVG vacuum generators can be installed in any position and are suitable for suction gripping systems, handling metal sheets, glass, marble, ceramics, plastic, cardboard, wood, etc. and, in particular, for the industrial robotics sector, where equipment with excellent performance but with limited weight and bulk are increasingly required.

Product codes: MVG3 MVG7

Product codes: MVG10 MVG14

- Cable set with built-in energy saving device

- Connector

- Cable with axial connector

- Cable with radial connector

- NO micro supply solenoid valve

- NC supply and blowing micro solenoid valve

- Replacement plate for micro blowing solenoid valve

- Digital vacuum switch

Product codes: 0015202 0015203 0015157 001220 001221 0015154 0015436 0015437 0015178 121010

Modular multi-function vacuum generators are true independent vacuum units that offer an entire vacuum control system.
They feature a reduced thickness and weight compared to their suction flow rate and they have been designed to be assembled with screws to one or more intermediate modules MI. The original internal connection system for the compressed air supply allows communication with no need for external manifolds.
This modular system allows increasing the number of independent vacuum units according to the requirements. In fact, you can order a multi-function vacuum generator and the intermediate modules with the desired capacities, already assembled, or you can assemble one or more intermediate modules to the GVMM generator that has already been installed on the machine, without having to make particular modifications. GVMM vacuum generators are composed of an anodised aluminium mono-block with lid, inside of which the silenced multiple ejectors are installed and the vacuum chamber and the compressed air supply connection are contained.
The following are instead installed on the outside:
- A micro solenoid valve for supplying compressed air to the generator.
- A micro solenoid valve for blowing the exhaust compressed air.
- An adjustable flow regulator for dosing the exhaust air.
- A digital vacuum switch provided with display and commutation LEDs, for managing the compressed air supply and for signalling the safety cycle start-up.
- An anodised aluminium or transparent Plexiglass manifold provided with vacuum connections with built-in suction filter, easy to inspect, and a check valve for maintaining the vacuum in case of electricity or compressed air failure.
By activating the compressed air power micro solenoid valve, the generator creates vacuum for use. As soon as the preset maximum value is reached, the digital vacuum switch acts on the electric coil of the micro solenoid valve and stops the air supply, reactivating it when the vacuum falls below the minimum level.Besides maintaining the level of vacuum within set safety values (hysteresis), this modulation allows for considerable compressed air savings.
A second signal from the vacuum switch (also adjustable and independent with respect to the first) can be used to start the cycle when the level of vacuum reached is suitable for use. Once the work cycle is completed, the micro solenoid valve that supplies air to the generator is deactivated while, at the same time, the ejection solenoid valve is activated for quick restoration of the atmospheric pressure upon use.
GVMM multi-function vacuum generators can be installed in any position and are suited for interconnecting vacuum gripping systems for handling sheet steel, glass, marble, ceramic, plastic, cardboard, wood, etc., and, in particular, for the industrial robotics sector which requires equipment with excellent performance and several independent vacuum units for controlling several applications but with reduced size and weight.

Product codes: GVMM3 GVMM7

Product codes: GVMM10 GVMM14

Intermediate modules are non-independent multi-stage and multi-function vacuum generators to be assembled to the generators of the GVMM range.

Their thickness and weight are reduced to the maximum compared to their suction flow rate and they have been designed to be enclosed between the lid and the base of the GVMM vacuum generator and fixed with screws. The internal connections for the compressed air supply allow communication between them and the basic generator, with no need for external manifolds.

This way, each module becomes an independent vacuum unit that can control an entire vacuum system.

They can be ordered in the desired amount and flow rate, either already assembled onto the GVMM multi-function vacuum generator, or separately, to be assembled to the GVMM generator previously installed onto the machine. In this case, we suggest ordering a screw kit suitable for the number of modules to be assembled.

MI intermediate vacuum modules are made up of the same elements that compose GVMM generators, except for the lid. They operate and they are used as the GVMM multi-function vacuum generator onto which they are assembled.

Product codes: MI3 MI7

Product codes: MI10 MI14

- Cable set with built-in energy saving device

- Connector

- Cable with axial connector

- Cable with radial connector

- Digital vacuum switch

- NO micro solenoid valve

- NC supply and blowing micro solenoid valve

- Plexiglass manifolds

- Aluminium manifolds

- Support

Product codes: 0015202 0015203 0015157 001220 001221 121010 0015176 0015175 0015171 0015188 0015174 0015187 0015306

GVMM Multi-Function Vacuum Generators – Modular System

These multi-function vacuum generators are designed with a modular concept, enabling flexibility and scalability while maintaining a compact shape with reduced size and weight.

Key Features:

1. Modular Design:
   • Can be assembled with one or more intermediate modules to form a customizable modular vacuum system.
   • Standard configuration allows assembly of up to 6 vacuum units.
   • Additional units can be assembled using threaded bars for enhanced scalability.
2. Compact and Lightweight:
   • The design ensures minimal size and weight, making it ideal for various space-constrained applications.

Applications:
Perfect for industries requiring modular vacuum systems that can be tailored to specific operational needs.

Product Codes:
00KITGVMM01, 00KITGVMM02, 00KITGVMM03, 00KITGVMM04, 00KITGVMM05, 00KITGVMM06, 00KITGVMM07, 00KITGVMM08, 00KITGVMM09, 00KITGVMM10, 00KITGVMM11

Multiple Ejector Vacuum Generators – PVP12MX / PVP12MXLP

This range of multiple ejector vacuum generators delivers a higher suction flow rate than single-stage models while maintaining the same compressed air consumption. They are engineered for performance and reliability in demanding industrial applications.

Key Features:

• Optimized Performance:
  • Designed to operate at supply pressures of 4–6 bar for MX items and 1–3 bar for MXLP versions.
  • Vacuum capacities range from 10.5 to 31 m³/h.
• Robust Construction:
  • Fully fabricated from anodised aluminium for durability and weight reduction.
  • Equipped with stainless steel ejectors and screws to ensure long-lasting, reliable operation.
  • Standard components include EPDM seals, silicone reed valves, and an integrated vacuum gauge for real-time monitoring.
• Versatile Connectivity:
  • Additional intake connections offer multiple usage points and simplified integration with control tools.
  • The suctioned air discharge connections are threaded, allowing for the optional attachment of “free-flow” SSX high sound damping silencers to further reduce operational noise.

Product Codes:
PVP12MX, PVP12MXLP

These generators are true independent vacuum units that can control an entire vacuum gripping system. Their distinctive features are their compact size and great suction flow rate.

They are composed of a mono-block anodised aluminium structure onto which are assembled:

- A modular and silenced multi-stage vacuum generator.

- A micro solenoid valve for supplying compressed air to the generator.

- A micro solenoid valve for blowing the exhaust compressed air.

- An adjustable flow regulator for dosing the exhaust air.

- A unidirectional check valve, located on the suction inlet, for maintaining the vacuum in case of electricity failure.

- A digital vacuum switch provided with display and commutation LEDs, for managing the compressed air supply and for signalling the safety cycle start-up.

- An anodised aluminium manifold provided with vacuum connections and a built-in filter easy to inspect.

By activating the compressed air power micro solenoid valve, the generator creates vacuum for use. As soon as the preset maximum value is reached, the digital vacuum switch acts on the electric coil of the micro solenoid valve and stops the air supply, reactivating it when the vacuum falls below the minimum level.

Besides maintaining the level of vacuum within set safety values (hysteresis), this modulation allows for considerable compressed air savings.

A second signal from the vacuum switch (also adjustable and independent with respect to the first) can be used to start the cycle when the level of vacuum reached is suitable for use. Once the work cycle is completed, the micro solenoid valve that supplies air to the generator is deactivated while, at the same time, the ejection solenoid valve is activated for quick restoration of the atmospheric pressure upon use.

The multi-function MVG vacuum generators can be installed in any position and are suitable for suction gripping systems, handling metal sheets, glass, marble, ceramics, plastic, cardboard, wood, etc. and, in particular, for the industrial robotics sector, where equipment with excellent performance but with limited weight and bulk are increasingly required.

Product codes: PVP25MX PVP25MXLP

Multi-Stage Vacuum Generators for OCTOPUS Gripping Systems

Specifically designed for integration into OCTOPUS gripping systems, this series of vacuum generators provides exceptional performance with adjustable vacuum levels and flow rates tailored to various applications.

Key Features:

1. Wide Suction Capacity Range:
   • Suction capacities range from 24 to 320 m³/h, catering to diverse operational requirements.
   • Supply pressures:
     • 4–6 bar for M items.
     • 1–3 bar for MLP items.
2. Efficient Operation:
   • Incorporates a new generation of ejectors that deliver an excellent air consumption-to-suction ratio for optimal efficiency.
3. Built-in Silencers:
   • Integrated silencers ensure quieter operation, contributing to a more comfortable working environment.
4. Durable Construction:
   • Fully crafted from anodised aluminium.
   • Stainless steel ejectors and screws add durability and reliability.
5. Optional Components:
   • EPDM or FKM seals and reed valves available upon request for enhanced flexibility.
6. Low Maintenance:
   • Simple scheduled filter cleaning ensures reliability while minimizing downtime.

Applications:
Ideal for vacuum cup handling systems, especially in applications requiring efficient suction flow, reliability, and reduced environmental noise.

Product Codes:
PVP40M, PVP70M, PVP100M, PVP40MLP, PVP70MLP, PVP100MLP

Product codes: PVP140M PVP170M PVP200M PVP140MLP PVP170MLP PVP200MLP

Product codes: PVP250M PVP300M PVP250MLP PVP300MLP

- Coaxial shutter servo-controlled supply valve

- Reed valve kit for check deviceon vacuum generators

- Flexible tube for connection to vacuum

- Complete kit for energy saving device ES

Product codes: 070371 00KITTRASM-MR 0015496 ES06

Multiple Ejector Vacuum Generators – MDX Series

This line of vacuum generators offers exceptional performance and efficiency, designed for a wide range of applications requiring reliable vacuum generation.

Key Features:

1. Enhanced Suction Performance:
   • Suction rates range from 20 to 103 m³/h.
   • Operating supply pressure:
     • 4–6 bar for MDX items.
     • 1–3 bar for MDXLP items.
   • Maximum vacuum level: -90 kPa.
2. Optimized Efficiency:
   • Features a new generation of ejectors that provide an excellent air consumption-to-suction ratio, minimizing operational consumption.
3. Durable and Reliable Construction:
   • Fully made with anodised aluminium for a lightweight yet durable build.
   • Includes stainless steel ejectors and screws for added robustness.
   • Equipped with EPDM seals as standard, with FKM reed valves available upon request.
4. Noise Suppression:
   • Standard installation of “free-flow” SSX high sound damping silencers on the air exhaust for quieter operation.
5. Flexible Connectivity:
   • Additional threaded connections allow for multiple points of usage or the installation of measurement and control tools.
6. Energy Saving Option (Optional):
   • Can be equipped with the ES (Energy Saving System) upon request, which includes:
     • A pneumatic vacuum regulator.
     • A pneumatic coaxial shutter supply valve.
     • A check valve.
     • Necessary tubing.

Product Codes:
PVP25MDX, PVP35MDX, PVP50MDX, PVP25MDXLP, PVP35MDXLP, PVP50MDXLP

Product codes: PVP60MDX PVP75MDX PVP60MDXLP PVP75MDXLP

- Mini pneumatic vacuum switch

- Coaxial shutter servo-controlled supply valve

- Membrane check valve

- Flexible hose kit with fittings

- Complete kit for energy saving device ES

Product codes: 120230X 070171 070271 100420 100520 0015308 ES01 ES02

High-Performance Silencers for Vacuum Generators

This innovative range of silencers, designed using natural fibre sound-absorbing material encased in special anodised aluminium housings, effectively reduces noise generated at vacuum generator exhausts.

Key Features:

1. Noise Reduction:
   • Achieves significant noise reduction, ranging from -13 dB(A) to -20 dB(A).
   • Two versions available with differing lengths; longer silencers offer greater noise reduction.
2. Durable Construction:
   • Made with anodised aluminium casings for reliability and longevity.
3. Wide Operating Range:
   • Suitable for working temperatures between -20°C and +100°C, ensuring versatility across diverse environments.

Applications:
These silencers are ideal for minimizing noise in vacuum systems across industrial sectors.

Product Codes:
SSX1/8, SSX1/4, SSX3/8R, SSX3/8, SSX1/2, SSX3/4R, SSX3/4, SSX1, SSX11/2, SSX2, 2SSX1/8, 2SSX1/4, 2SSX3/8, 2SSX1/2, 2SSX3/4, 2SSX1, 2SSX11/2, 2SSX2

The special shape of these vacuum generators has allowed obtaining great suction capacities in very limited overall dimensions.

The new design stainless steel ejectors are assembled on modular frames; the overlapping of one or more frames defines the flow rate of the generators. They are supplied with a flow rate ranging from 85 e 900 m3/h and a maximum level of vacuum of -90KPa. The supply pressure goes from 4-6 bar for MD items and from 1-3 bar for MDLP items. Level of vacuum and flow rate can be adjusted according to the supply air pressure. They are fully made with anodised aluminium.

The sealing gaskets and disc valves are EPDM as standard, but can be supplied in FKM upon request. Also upon request, an energy saving kit for the compressed air ES (Energy Saving System) can be supplied. It is composed of a pneumatic coaxial shutter valve for supply of the compressed air, an integrated pneumatic vacuum switch, a reed valve kit for the check system and a flexible tube with quick fitting to monitor and transmit the value of the level of vacuum to the vacuum switch.

Perfectly soundproofed with silencers built into all generators, offering extremely quiet operation.

Product codes: PVP150MD PVP300MD PVP150MDLP PVP300MDLP

Product codes: PVP150MD PVP300MD PVP150MDLP PVP300MDLP

Product codes: PVP750MD PVP750MDLP

- Coaxial shutter servo-controlled supply valve

- Reed valve kit for check device on vacuum generators

- Flexible tube for connection to vacuum

- Complete kit for energy saving device ES

Product codes: 070471 00KITTRASMD-MDR 0015496 ES05

Working principle

These vacuum generators operate based on the Venturi principle.

Unlike those previously described, the ejectors with which they are supplied are adjustable, in addition to having a considerably higher flow diameter.

This detail lets them vary the flow rate and level of vacuum of the device, without altering the level of vacuum of the supply air.

The compressed air consumption is also related to the actual performance of the vacuum generator.

Features

The special shape of these adjustable vacuum generators, as well as their straight-flow working principle allow sucking and transferring products of various nature with no interference, just like flow generators, only, unlike these, they allow overcoming much higher level differences.

They are suited for transferring powders, granulated products, sawdust, metal chips, dry or liquid food products, etc. They are also recommended for controlling vacuum cups in presence of large amounts of dust or liquids, as well as for sucking fumes, cooling mists, water and oil condensation, etc. The absence of moving parts allows for a continuous use without developing heat.

The noise level, which is quite high for this kind of equipment, can be considerably reduced with a silencer screwed on the exhaust connection.

They do not require electricity, therefore, they can even be used in work environments with hazardous environments where an ignition source would be dangerous.

Available in anodised aluminium and stainless steel.

Thanks to all these features, a good filtration of the compressed air supply will be sufficient to make these devices fully maintenance-free.

Product codes: PVR25 PVR50

Product codes: PVR100 PVR200

Compact Cartridge Vacuum Generators – PVR Series

Specifically engineered for seamless integration into the gripping elements of packaging machines, these small cartridge vacuum generators combine efficiency and durability in a compact design.

Key Features:

1. Low Pressure Operation:
   • Achieves maximum performance at compressed air pressures of 2–3 bar.
   • Provides vacuum levels up to -72 kPa and suction flow rates ranging from 1 to 4 m³/h.
2. Dust-Resistant Design:
   • Their unique shape permits suction of dust and small processing residues without clogging, ensuring uninterrupted operation.
3. Durable Material Options:
   • Made as standard with anodised aluminium for lightweight yet robust construction.
   • Stainless steel versions available upon request for increased resistance and longevity.

Applications:
Ideal for packaging machines and handling systems requiring compact, efficient vacuum generators capable of managing debris-laden environments.

Product Codes:
PVR1, PVR4

Compact Cartridge Vacuum Generator – PVR3OT

Developed to meet the packaging sector’s demand for smaller yet highly efficient devices, this cartridge vacuum generator delivers reliable performance in a compact design.

Key Features:

1. Low Pressure Operation:
   • Designed to operate with compressed air supply pressures between 1 and 3 bar.
   • Achieves a maximum vacuum level of -52 kPa with a flow rate of 2.6 m³/h.
2. Dust-Resistant Design:
   • Its unique shape ensures effective suction of dust and small processing residues without clogging, guaranteeing uninterrupted operation.
3. Material Options:
   • Constructed from brass as standard for durability.
   • Available in alternative metals upon request for enhanced adaptability to specific requirements.

Applications:
Ideal for packaging systems requiring compact vacuum solutions capable of handling debris-laden environments efficiently.

Product Code:
PVR3OT

Rectilinear Flow Vacuum Generator – PVR25MS

This vacuum generator is designed for efficient operation even in challenging environments, ensuring reliable vacuum supply to vacuum cups in the presence of dust, liquids, sawdust, shavings, and similar contaminants.

Key Features:

1. Efficient Performance:
   • Achieves a vacuum level of -70 kPa with a suction flow rate of approximately 10 m³/h.
   • Operates at a compressed air supply pressure of 3 bar.
2. Specialized Design:
   • The rectilinear flow structure ensures uninterrupted operation, even with abundant contaminants present.
   • Equipped with a support for fixing to flat vacuum cups with a minimum diameter of Ø 200 mm.
   • Optional adapter available for fixing the generator at a distance.
3. Noise Suppression:
   • Includes a "free-flow" silencer installed on the intake air exhaust for high sound reduction.
   • Safety protection prevents dispersion of sucked solid impurities into the work environment.
4. Optional Monitoring Components:
   • A digital micro vacuum switch (item 12 05 11 P) is available upon request for monitoring vacuum levels inside the vacuum cup.
   • A vacuum gauge (item 09 03 15) can also be supplied for direct reading of vacuum levels.
5. Low Maintenance:
   • Requires only proper filtration of the compressed air supply for maintenance-free operation.

Applications:
Recommended for use with vacuum cups to grip:

• Marble and granite
• Bricks
• Rusty metal sheets
• Rough wooden boards
• Other materials with particularly dirty gripping surfaces

Product Code:
PVR25MS

- Digital micro vacuum switch

- Vacuum gauge

- Threaded adapter for suction mouth item 00 15 397

- Safety protection for exhaust silencer SSX 1/4” item 00 15 341

Product codes: 120511P 090315 0015397 0015341

The noise level of Conveyor adjustable vacuum generators, which is always quite high, can be considerably mitigated by a suitable silencer screwed onto the air exhaust connection.

SSX series silencers can be supplied upon specific request. These are suitable for all Conveyor vacuum generators.

The table below shows the codes of the silencers related to the various vacuum generators.

Product codes: PVR25 PVR50 PVR100 PVR200 SSX1/4 SSX1/2 SSX3/4 SSX1 2SSX1/4 2SSX1/2 2SSX3/4 2SSX1

Working principle

The compressed air supply blown into a ring chamber concentric to the device, flows at a very high speed towards the centre of the main pipe, thus forming a cyclonic effect.

The latter creates a vacuum inside the device and leads a great volume of air towards its outlet.

Therefore, a variation of the air supply pressure will modify the level of vacuum and the amount of sucked air.

Features

The special shape of the flow generators and their straight-flow working principle allow for the suctioning and handling of various nature products without interference. Vacuum Jets are in fact suitable for the handling of powders, granulated products, sawdust, corn, metal chips, liquid or dry food products, etc., or for extracting fumes, coolant mists, water or oil condensation, etc.

The absence of moving parts allows them to be used continuously, without developing heat.

They do not require electricity; therefore, they can be used in work environments with hazardous environments where an ignition source would be dangerous.

Available in anodised aluminium and stainless steel.

Thanks to all these features, a good filtration of the compressed air supply will be sufficient to make these devices fully maintenance-free.

Prodcut codes: CX7 CX10

Product codes: CX13 CX19

Product codes: CX25 CX38 CX50